Â Â SHARP METAL TEETH - Anodized aluminum diamond shaped grinding teeth STRONG MAGNET - Powerful Neodymium Magnets keep the lid in place and the herbs inside LIFETIME WARRANTY
Â Â Anodized for smooth finish; this means no wear or smudge marks.
Razor sharp Diamond Cutting Blades for extreme efficiency.
Stainless steel pollen screen allows for only the finest pollen to fall to the bottom catch.
Powerful Neodymium Magnets for incredible closure.
Thin poly O ring around top grinding section, for smooth grinding and no friction.
Comes with protective pouch and pollen scrape
What is a herb grinder?
A grinder is a device made to grind herbs and spices into small bits. It can be used for grinding kitchen herbs, but it is more widely used to grind buds into smaller sized particles. A typical grinder consists of two halves that can be separated and have sharp teeth or pegs aligned in such a way that when both halves are turned, material placed inside is effectively shredded.
Grinders come in many different shapes and sizes, but a round cylindrical shape is most common. Grinders are available in various types of materials, such as wood, metal, acrylic or aluminium. Even titanium grinders can be found.
Most important when looking at the durability and strength of a grinder, is the construction and used material of the teeth and the way they are attached to the base. Plastic grinders are often not very durable and the teeth can break easily when the herb placed inside is too compressed or contains stems or chalks. Aluminium or metal is the preferred material when looking to purchase a durable grinder that will last for years.
The larger the grinder, the more ground material can be acquired at a time. Hence a larger grinder will also weigh more, and thus may not be as suitable for carrying it in your pocket. Some grinders will have a magnet that connects the two parts and keeps them in place. This also allows for better grinding movement, as both halves will remain in the exact same place.
Usage and maintenance
1) The top and bottom are separated, and herb is placed in between the teeth.
2) Now the top and bottom are placed together and the two parts are twisted in opposite direction. The more time spent grinding, the finer the particles will be.
3) Pick up one part of the grinder: the herb is now ground and ready for usage.
After some time there will likely be some build-up of resin and trichomes that are stuck to the teeth and bottom of your grinder. An easy way to clean this is to brush off the crystals by applying a small bristle or hard tipped paint brush. This will not only increase the effectiveness of your grinder, you'll also have a nice little bonus as a reward for your diligent cleaning.
High Temperature Heat Pump,Industrial Hot Water Heat Pump,Industry Heat Pump Water Heater,High Temperature Air To Water Heat Pump
Guangdong Shunde O.S.B. Environmental Technology CO.,LTD. , https://www.heatpump-osb.com