NBR Temperature Resistance of Power Steering Oil Seal

Model NO.: OL
Standard: Standard, Nonstandard
Color: Black,Brown,and So on
Working Medium: Hydraulic Oil, Water and Dust
Suitable Temperature: -50°c -120°c
Shore Hardness: 30-100
Trademark: Sxon
Transport Package: Carton or as Your Required
Specification: All size
Origin: China
HS Code: 4016931000
Model NO.: OL
Standard: Standard, Nonstandard
Color: Black,Brown,and So on
Working Medium: Hydraulic Oil, Water and Dust
Suitable Temperature: -50°c -120°c
Shore Hardness: 30-100
Trademark: Sxon
Transport Package: Carton or as Your Required
Specification: All size
Origin: China
HS Code: 4016931000
NBR Temperature Resistance of Power Steering Oil Seal

Product details:
Item name: Oil Seal
Meterial: NBR, FKM, HNBR , Viton,Silicon ,Q, EPDM, ACM,  etc
Application: Engine, Transmission, Rear Axle
Speed: Speed Mechanical Seal
lip: Double lips and single lip are available
Shape: O Type
Color: Black, brown or as you required
Pressure: Pressure type
Working Medium:  Hydraulic Oil, Water and Dust
Payment terms: L/C or T/T or Western Union
Trademark: ODM, OEM
Performance: High temperature resistance,Good oil resistance
Standard: Nonstandard / Standard
Hardness: 30-100
Transport package: Carton or as Your Required
Factory visit: Available
Company Type Manufacturer/Factory & Trading Company
Origin: China(mainland)
Hscode: 4016931000
Supply 500000 per/month
Brief Introduction
Oil seal is also known as rotary shaft seal. They are often called grease, fluid or dirt seals. An oil seal normally consists of three basic components: The Sealing Element (the nitrile rubber part), the Metal Case, and the Spring. It is a widely used sealing component. 
Temperature: -50°C -120°C Depending On Rubber Material
Pressure: Up to 0.03 MPa
Reciprocation Speed: 0-20m/S
Medias: mineral oils, water, lubricating grease
Specification: 6-13000mm
Hardness: 30-100

Related Products:

NBR Temperature Resistance of Power Steering Oil Seal

NBR Temperature Resistance of Power Steering Oil Seal

Testing Equipments

1,Hardness testing: hardness testing of various materials to ensure product hardness to meet customer requirements.
2,Tensile machine: according to the material property requirements test tensile force, according to the standard through the test.
3,Microscopic examination: sampling rate of 20%, oil seal surface is fine cracks, there is scrap, no pass; if the sampling failure rate of 3% and above, the whole batch of full inspection, to ensure quality.
4,Aging box: aging of the material, the temperature of 200 degrees and above, aging phenomenon, then scrapped.
5,Vulcanizing apparatus: test the quality of the glue material, the value is within the standard range, and then pass the test according to the standard.


NBR Temperature Resistance of Power Steering Oil Seal


Certification

We have passed ROHS , ISO9001:2008 quality system certification.

NBR Temperature Resistance of Power Steering Oil Seal

 
Packing&Shipping:     
Size Official size 
Packing A roll of 10, a bundle of 100, and finally put into the packing box
About the packing details for sizes, also according to your requirements.
Delivery Time:  5-7 days after payment
Payment Terms: 100%TT advance payment for LC order
Normally, the goods will be shipping by Sea, by air or by air express according to customer's request.

Company profile
With 34 years experience in producing rubber oil seals, Jiang Yin (No. 3) Rubber Manufacturer Co., Ltd. is a professional manufacturer and industry leader in the researching, manufacturing and selling types of designing, manufacturing and selling types of skeleton oil seals, O rings, Rubber gaskets, Pump valve oil seals and Oil seal cover. Our products can be made into flame retardant, oil resistant, acid and alkali resistance, pressure resistance, tear resistance, yielding high temperature according to different raw materials (250 DEG C) and low temperature (-40 DEG C) rotating type, reciprocating dynamic seal and static seal, according to your actual needs.
NBR Temperature Resistance of Power Steering Oil Seal
 
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally 3-7 days for standard sealing products; and 15-20 days for big order and custom non-standard products.
Q: Do you provide free samples?
A: Yes, we offer free sample while customer need pay for the freight charge.
Q: Which Payment way is workable?
A: Irrevocable L/C, Cash, PayPal, Credit card and T/T money transfers.
B: 30% T/T deposit in advance, 70% balance before shipment after presentation of ready cargo.
C: L/C ( Irrevocable LC at sight: Order amount over USD10,000)
Q: What is your standard packing?
A: All the goods will be packed by carton box and loaded with pallets. Special packing method can be accepted when needed.
Q: How to select the raw compound for my application?
A: With years of experience working with a variety of material, we can help select the material that will best suit your needs while keeping material costs in mind.
Q: Do you use any international standards for the rubber products?
A: Yes, we mainly use ASTM D2000 standard to define the quality of the rubber materials, tolerances as per ISO3302, ISO2768, etc.
Q: Can you supply different color materials?
A: Yes, we can produce custom molded rubber and silicone rubber products in different colors, the color code will be required in case of an order.
Q: What materials are available to produce from your side?
A: NBR, EPDM, SILICONE, VITON(FKM), NEOPRENE(CR), NR, IIR, SBR, ACM, AEM, Fluorosilicone(FVMQ), FFKM, Liquid Silicone, Sponge, etc.
 










  NBR Temperature Resistance of Power Steering Oil Seal

Product details:
Item name: Oil Seal
Meterial: NBR, FKM, HNBR , Viton,Silicon ,Q, EPDM, ACM,  etc
Application: Engine, Transmission, Rear Axle
Speed: Speed Mechanical Seal
lip: Double lips and single lip are available
Shape: O Type
Color: Black, brown or as you required
Pressure: Pressure type
Working Medium:  Hydraulic Oil, Water and Dust
Payment terms: L/C or T/T or Western Union
Trademark: ODM, OEM
Performance: High temperature resistance,Good oil resistance
Standard: Nonstandard / Standard
Hardness: 30-100
Transport package: Carton or as Your Required
Factory visit: Available
Company Type Manufacturer/Factory & Trading Company
Origin: China(mainland)
Hscode: 4016931000
Supply 500000 per/month
Brief Introduction
Oil seal is also known as rotary shaft seal. They are often called grease, fluid or dirt seals. An oil seal normally consists of three basic components: The Sealing Element (the nitrile rubber part), the Metal Case, and the Spring. It is a widely used sealing component. 
Temperature: -50°C -120°C Depending On Rubber Material
Pressure: Up to 0.03 MPa
Reciprocation Speed: 0-20m/S
Medias: mineral oils, water, lubricating grease
Specification: 6-13000mm
Hardness: 30-100

Related Products:

NBR Temperature Resistance of Power Steering Oil Seal

NBR Temperature Resistance of Power Steering Oil Seal

Testing Equipments

1,Hardness testing: hardness testing of various materials to ensure product hardness to meet customer requirements.
2,Tensile machine: according to the material property requirements test tensile force, according to the standard through the test.
3,Microscopic examination: sampling rate of 20%, oil seal surface is fine cracks, there is scrap, no pass; if the sampling failure rate of 3% and above, the whole batch of full inspection, to ensure quality.
4,Aging box: aging of the material, the temperature of 200 degrees and above, aging phenomenon, then scrapped.
5,Vulcanizing apparatus: test the quality of the glue material, the value is within the standard range, and then pass the test according to the standard.


NBR Temperature Resistance of Power Steering Oil Seal


Certification

We have passed ROHS , ISO9001:2008 quality system certification.

NBR Temperature Resistance of Power Steering Oil Seal

 
Packing&Shipping:     
Size Official size 
Packing A roll of 10, a bundle of 100, and finally put into the packing box
About the packing details for sizes, also according to your requirements.
Delivery Time:  5-7 days after payment
Payment Terms: 100%TT advance payment for LC order
Normally, the goods will be shipping by Sea, by air or by air express according to customer's request.

Company profile
With 34 years experience in producing rubber oil seals, Jiang Yin (No. 3) Rubber Manufacturer Co., Ltd. is a professional manufacturer and industry leader in the researching, manufacturing and selling types of designing, manufacturing and selling types of skeleton oil seals, O rings, Rubber gaskets, Pump valve oil seals and Oil seal cover. Our products can be made into flame retardant, oil resistant, acid and alkali resistance, pressure resistance, tear resistance, yielding high temperature according to different raw materials (250 DEG C) and low temperature (-40 DEG C) rotating type, reciprocating dynamic seal and static seal, according to your actual needs.
NBR Temperature Resistance of Power Steering Oil Seal
 
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally 3-7 days for standard sealing products; and 15-20 days for big order and custom non-standard products.
Q: Do you provide free samples?
A: Yes, we offer free sample while customer need pay for the freight charge.
Q: Which Payment way is workable?
A: Irrevocable L/C, Cash, PayPal, Credit card and T/T money transfers.
B: 30% T/T deposit in advance, 70% balance before shipment after presentation of ready cargo.
C: L/C ( Irrevocable LC at sight: Order amount over USD10,000)
Q: What is your standard packing?
A: All the goods will be packed by carton box and loaded with pallets. Special packing method can be accepted when needed.
Q: How to select the raw compound for my application?
A: With years of experience working with a variety of material, we can help select the material that will best suit your needs while keeping material costs in mind.
Q: Do you use any international standards for the rubber products?
A: Yes, we mainly use ASTM D2000 standard to define the quality of the rubber materials, tolerances as per ISO3302, ISO2768, etc.
Q: Can you supply different color materials?
A: Yes, we can produce custom molded rubber and silicone rubber products in different colors, the color code will be required in case of an order.
Q: What materials are available to produce from your side?
A: NBR, EPDM, SILICONE, VITON(FKM), NEOPRENE(CR), NR, IIR, SBR, ACM, AEM, Fluorosilicone(FVMQ), FFKM, Liquid Silicone, Sponge, etc.
 










 

Concrete Cutter is used for cutting concrete, masonry, brick, asphalt, tile, and other solid materials. It is a walk-behind Concrete Cutter, can option the gasoline,petrol engines. The saw blade is diamond sawblade, popularly used for cutting concrete, asphalt, stone, etc. The enlarged bearing, reinforced power shaft.

FURD road cutters are designed for strength, durability and performance. Whether cutting concrete or asphalt, the reinforced steel box frame design adds strength necessary to reduce vibrations while sawing. Minimizing vibrations enhance the performance of the blade and extend the life of the saw.

Road Cutter

Road Cutter

Road Cutter,Concrete Cutter,Concrete Road Cutter,Road Cutter Machine

Jining Furuide Machinery Manufacturing Co., Ltd. , https://www.furdroller.com

Posted on