Sample pulverizer

Introduction to sample pulverizer

HY98 series sealed sample preparation and pulverizer is a new type of equipment which has been designed and improved according to the reasonable dust-free opinions of users. Having a beautiful appearance, good sealing, low noise, small size, especially stable, without having to install, sample preparation time is short, and uniform particle size without sieved advantages, excellent dust removing effect for a variety of metals and hardness non-metallic mineral crushing, electricity, coal, metallurgy, chemicals, building materials and other industries as well as commodity inspection, quality supervision departments and other research necessary choice for sample preparation equipment

Sample pulverizer features and advantages

1 The structure of the machine is driven by the bridge shaft, the motor never carries the load and is durable;

2 The machine does not need to lay the foundation, it can be used when it is laid flat.

Pressing method: the rod pressing and locking device will not return loose

1 extremely stable center of gravity design; 2 lowest noise level; 3 high efficiency sample preparation speed; 4 efficient dust removal;

Feeding bowl Material: high-manganese steel (MN)

Model: HY98-A

One sample preparation (1): 1 Charge weight (g): 400-500 Charge particle size (mm): ≤ 26 Grinding time (min): 1-3 Discharge size (mm): 0.2-0.076 (80- 200 mesh) Machine weight (kg): 180 Rated voltage (v): 380 Motor power (kw): 1.1

Model: HY98-2A

One sample preparation (2): 2 Charge weight (g): 2*400-500 Charge particle size (mm): ≤26 Grinding time (min): 1-3 Discharge size (mm): 0.2-0.076 ( 80-200 mesh) Machine weight (kg): 210 Rated voltage (v): 380 Motor power (kw): 1.5

Model: HY98-3A

One sample preparation (1): 3 Charge weight (g): 3*400-500 Charge particle size (mm): ≤26 Grinding time (min): 1-3 Discharge size (mm): 0.2-0.076 ( 80-200 mesh) Machine weight (kg): 240 Rated voltage (v): 380 Motor power (kw): 1.5

Model: HY98-B

One sample preparation (1): 1 Charge weight (g): 200-300 Charge particle size (mm): ≤ 20 pulverization time (min): 1-3 discharge particle size (mm): 0.2-0.076 (80- 200 mesh) Machine weight (kg): 178 Rated voltage (v): 380 Motor power (kw): 0.75

Model: HY98-2B

One sample preparation (2): 2 Charge weight (g): 2*200-300 Charge particle size (mm): ≤ 20 pulverization time (min): 1-3 discharge particle size (mm): 0.2-0.076 ( 80-200 mesh) Machine weight (kg): 200 Rated voltage (v): 380 Motor power (kw): 1.5

Model: HY98-3B

One sample preparation (pieces): 3 Charge weight (g): 3*200-300 Charge particle size (mm): ≤ 20 pulverization time (min): 1-3 discharge particle size (mm): 0.2-0.076 ( 80-200 mesh) Machine weight (kg): 226 Rated voltage (v): 380 Motor power (kw): 1.5

Model: HY98-1

One sample preparation (1): 1 Charge weight (g): 100 Charge particle size (mm): ≤ 16 pulverization time (min): 1-3 discharge particle size (mm): 0.2-0.076 (80-200 mesh) ) Machine weight (kg): 160 Rated voltage (v): 380 Motor power (kw): 0.75

Model: HY98-2

One sample preparation (2): 2 Charge weight (g): 2*100 Charge particle size (mm): ≤16 Grinding time (min): 1-3 Discharge size (mm): 0.2-0.076 (80- 200 mesh) Machine weight (kg): 180 Rated voltage (v): 380 Motor power (kw): 0.75

Model: HY98-3

One sample preparation (pieces): 3 Charge weight (g): 3*100 Charge particle size (mm): ≤16 Grinding time (min): 1-3 Discharge size (mm): 0.2-0.076 (80- 200 mesh) Machine weight (kg): 190 Rated voltage (v): 380 Motor power (kw): 0.75

Model: HY98-4

One sample preparation (unit): 4 Charge weight (g): 4*100 Charge particle size (mm): ≤ 16 pulverization time (min): 1-3 discharge particle size (mm): 0.2-0.076 (80- 200 mesh) Machine weight (kg): 240 Rated voltage (v): 380 Motor power (kw): 1.1

Model: HY98-6

One sample preparation (pieces): 6 Charge weight (g): 6*100 Charge particle size (mm): ≤16 Discharge size (mm): 0.2-0.076 (80-200 mesh) Machine weight (kg) :280 Rated voltage (v): 380 Motor power (kw): 1.5

Model: HY98-7

One sample preparation (1): 7 Charge weight (g): 7*100 Charge particle size (mm): ≤16 Grinding time (min): 1-3 Discharge size (mm): 0.2-0.076 (80- 200 mesh) Machine weight (kg): 300 Rated voltage (v): 380 Motor power (kw): 1.5

Model: HY98-1000

One sample preparation (1): 1 Charge weight (g): 1*1000 Charge particle size (mm): ≤26 [1] Machine weight (kg): 300 Motor power (kw): 1.5

Product Parameters
AC Standard Fan Bar Plate(plate-fin) Heat Exchanger Series

Features: 
Aluminum bar plate fin structure, with standard motor, high strength fan leaves. Optional temperature switch or filter.

Application: 
Hydraulic system return line, lubrication system, independent cooling circuit and gear box cooling.
Machine tools, special machinery, engineering machinery, wind power equipment, hydraulic power stations, lubrication systems, gearbox, and so on.
Heat Transfer Capacity from 4-32HP
Optional 50/60 HZ (110/220/


Technical Parameters:

Different voltage when there are different power consumption, the table only AC380V / 50Hz as an example.
Fan motor standard for the suction type, IP54 or IP55, F-class insulation, in line with CE standards.

The noise value is a value at a distance of 1 m.


Hydraulic Motor Fan Bar Plate(Plate-fin) Heat ExchangerDC Driven Fan Bar Plate(Plate-fin) Heat Exchanger

AC Aluminum Shell Fan Heat Exchanger

Shell Fan Heat Exchanger,Aluminum Fan Heat Exchanger,Fin Fan Heat Exchanger,Ac Shell Fan Heat Exchanger

Xinxiang Zhenhua Radiator Co., Ltd. , https://www.thermal-manage.com

Posted on